PWR Power station

This is an AP-1000 PWR power station. You can be any characters and also control the power station. This is an AP-1000 powerplant which is a pressurized water nuclear power plant with 2 steam generators and 4 evenly split RCPs and a textbook plant design. The chosen secondary setup is this: Each steam generator's steam output combines into 1 pipe with 4 main steam isolation valves and 6 relief valves. The main steam line is piped into a main turbine with 1 high pressure turbine and 3 low pressure turbines as well as 1 moisture seperator reheater. The steam from the low pressure steam turbines goes into the condenser where the water output from the hotwell is sent into a polisher tank before being sent into 2 feedwater preheaters. The purified and heated feedwater is then sent into the dearrator where bypassed or seperated steam is used for the final preheat and polishing section. The hot and pure water is then split and sent into the steam generators. There are 3 condensate pumps and 1 emergency condensate pump which pump water from the condenser through the loop until the dearrator (where pressure is relieved and the feedwater pumps must take over). There are 3 feedwater pumps which take water from the dearrator and 2 emergency feedwater pumps (1 for each steam generator). The condenser is cooled by 2 cooling towers and a nearby river. The plants ORM is 2000MWth and the reactor temperature ORM is 500°C.